Levelling The Cooker - Elba 6E EX 397 I Instructions For The Use - Installation Advices

Fig. 7.2
Fig. 7.3
Fig. 7.4
B
A
A
FITTING THE ADJUSTABLE FEET AND

LEVELLING THE COOKER

The adjustable feet must be fitted to the
base of the cooker before use (fig. 7.2).
Rest the rear of the cooker on a piece of
the polystyrene packaging exposing the
base for the fitting of the feet.
Fit the 4 legs by screwing them tight into
the support base as shown in figure 7.2.
LEVELLING THE COOKER
The cooker may be levelled by screwing
the lower ends of the feet IN or OUT (fig.
7.3).
FIXING THE BACKGUARD
(
SOME MODELS ONLY
Before installing the cooker, assemble the
backguard "B" .
The backguard "B" can be found packed at
the rear of the cooker.
1. Before assembling,
protective film/ adhesive tape.
2. Remove the three screws "A" from the
rear of the cooktop.
3. Assemble the backguard as shown and
fix it by screwing the three screws "A".
)
remove any
37