Automatic Oven Cooking - Elba 6E EX 397 I Instructions For The Use - Installation Advices

AUTOMATIC OVEN COOKING

To cook food automatically in the oven, it is
necessary to:
1. Set the length of the cooking period.
2. Set the end of the cooking time.
3. Set the temperature and the oven
cooking program.
These operations are done in the following
way:
1. Set the length of the cooking period
by pushing the
button to increase, or
you have passed the desired time (fig.
5.5). The AUTO and the
will illuminate.
2. Set the end of the cooking time by
pressing the
time already added to the clock time
will appear), and the
5.6); if you pass the desired time you
may get back by pushing the

After this setting, the
disappear. If after this setting, the
AUTO flashes on the display and a
buzzer sounds, it means there was
an error in the programming, that
is that the cooking cycle has been
superimposed on the clock. In this
case, modify the end of cooking
time or the cooking period itself by
following again the above mentioned
instructions.
Fig. 5.5
button and the
to decrease if
symbol
button (the cooking
button (fig.
button.
symbol will
3. Set the temperature and the cooking
program by using the switch and
thermostat knobs of the oven (see
specific chapters).
Now the oven
everything will work automatically, that is
the oven will turn on at the right moment
to end the cooking at the established hour.
During cooking, the
illuminated.
By pushing the
time that remains until the end of cooking.
The cooking program may be cancelled
at any time by pushing
At the end of the cooking time the oven
will turn off automatically, the
will turn off, AUTO will flash and a buzzer
will be sound, which can be turned off by
pushing any of the buttons except the
/ buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto "manual"
by pressing the
Attention: After a power cut the clock resets
to zero and cancels the set programs.
After a power cut, three zeros will flash on
the display.
Fig. 5.6
is programmed
symbol remains
button you can see the
.
symbol
button.
and
27