Safety Check - GBC FALCON 60 C Instruction Manual

Installation

4.10 Safety check

The safety check will ensure that all safety devices
and interlocks are functioning properly.
This procedure describes how to check one
E-STOP and the PHOTO-EYE. Repeat the steps for
the remaining three E-STOPS. ALL SAFETY
FEATURES MUST BE CHECKED!
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
If a safety feature is not working
properly, contact your local service
representative immediately.
Contacts:
GBC National Service: ( 800 ) 790 - 7787
My service rep:_____________________
Page 4 - 12
WARNING
WARNING
F 60 C Operation and Maintenance Manual
E-STOPs
a) Turn MAIN POWER to ON .
P O
W
E R
b) Press RESET. The power indicator on the front
control panel will be illuminated.
Reset
P O
W
E R
c) Press the motor direction to FORWARD.
(reverse)
© April 2001 General Binding Corporation
On
Off
(forward)