Unpacking; Shrink Wrapped - GBC FALCON 60 C Instruction Manual

Installation

4.3 Unpacking

INFORMATION
A L L S H I P M E N T S A R E E X - W O R K S . At our
dock, title passes to the buyer. Please review
your insurance coverage prior to shipment,
as you are responsible for all subsequent
freight charges and risks.
INFORMATION
Before signing the Bill of Lading, you
should be sure to inspect the crate
and / or pallet for signs of damage or
missing items; if applicable, make
note of this on the Bill of Lading.
INFORMATION
Depending on the destination and customer
preference, your machine may be shipped in
various ways. The laminator may arrive
shrink wrapped or in a plywood crate on a
skid. Please follow the unpacking procedure
that pertains to your method of shipment.
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the laminator.
Page 4 - 4
WARNING
F 60 C Operation and Maintenance Manual
With regards to your shipping methods, use one
of the following procedure described to safely and
properly unwrap / uncrate your laminator.

4.4 Shrink Wrapped

a) Inspect the machine for any obvious shipping
damages upon receipt. Report any damage to
your carrier.
b) Carefully unwrap the shrink wrap from around
the laminator.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
c) Carefully wheel your Falcon 60 C Laminator
with a second person to the installation site.
Do not attempt to move the laminator across
anything other than a flat level surface
without trained and qualified riggers. You
can be crushed or seriously injured.
© April 2001 General Binding Corporation
CAUTION
WARNING