Crated - GBC FALCON 60 C Instruction Manual

F 60 C Operation and Maintenance Manual

4.5 Crated

T he Falcon 60 C L am inator is a large and
heavy piece of equipm ent. It is necessary to
em ploy L IC E N SE D R IG G E R S O N L Y to
m ove the lam inator. T he lam inator is not
designed to be tipped up or sidew ays in any
w ay. Such action disturbs the exact
alignm ent of the rolling parts of the m achine
and requires extensive realignm ent. Y ou can
be crushed or seriously injured.
INFORMATION
GBC Film Group's warranty does not
cover malfunction of the equipment due to
mishandling and / or tipping. GBC Films
Group bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
Tools required
• # 2 Phillips head screwdriver
• 7/8" open end wrench or adjustable wrench
• Crow bar
• A second person
© April 2001 General Binding Corporation
W A R N IN G
To uncrate the laminator
a) Remove the top of the crate and then the sides
in the order shown in Figure 4.5.1
CAUTION
Do not allow the top to fall into the crate. It
can damage the laminator.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
CAUTION
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the laminator or cause harm to you
and others.
Installation
Page 4 - 5