GBC FALCON 60 C Instruction Manual page 40

Installation
Figure 4.5.1 Disassembling of the crate
R
A H
Removing the shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
b) Move all packing materials to a safe distance.
Page 4 - 6
1
CAUTION
F 60 C Operation and Maintenance Manual
Moving the laminator
a) Have the laminator rolled off the skid and placed
on the floor by licensed riggers. The ramps
included with the laminator can be secured utilizing
screws removed from the disassembled crate.
Figure 4.5.2 illustrates positioning of the ramps.
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
roll the machine off.
Figure 4.5.2 Positioning of the ramps
b) Remove any plastic strapping and/or packing
paper taped to the rollers.
© April 2001 General Binding Corporation
WARNING