Unpacking - GBC 930-073 Operation And Maintenance Manual

4.4 Unpacking

INFORMATION: All shipments are ex-works. At
our docks, title passes to the buyer. Please review
your insurance coverage prior to shipment, as you
are responsible for all subsequent freight charges
and risks.
INFORMATION: Before signing the Bill of Lading,
be sure to inspect the crate, box and/ or pallet for
signs of damage or missing items. If applicable, make
note of this on the Bill of lading.
1.
Inspect the machine for any obvious shipping damages
upon receipt.
2.
Carefully unwrap the shrink wrap from around the
laminator.
CAUTION: Do not use a knife or other sharp object
to remove any shrink wrap from around the
laminator. You can cause irreparable damage to the
rollers!
3.
With another person, carefully remove the contents
and assemble the laminator.
4.
With assistance, carefully move the laminator to the
desired location.
Page 4-4
Spartan Operation and Maintenance Manual
WARNING: Do not attempt to move the laminator
across anything other than a flat level surface alone.
You can be crushed or seriously injured.
WARNING: Do not turn the laminator sideways, up
side down or vertical when moving. This will disrupt
the alignment of internal moving parts.
© 2004 General Binding Corporation