Connecting A Computer; Figure 10 Mounting The Safety Shield - Metrohm Autosampler plus 919 IC Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3.7

Connecting a computer

919 IC Autosampler plus
Figure 10 Mounting the safety shield
The 919 IC Autosampler plus requires a USB connection to a computer in
order to be able to be controlled by a computer software. Using a
6.2151.000 controller cable, the instrument can be connected directly,
either to a USB socket on a computer, to a connected USB hub or to a
different Metrohm control instrument.
You need administrator rights for the installation of driver software and
control software on your computer.
Cable connection and driver installation
A driver installation is required in order to ensure that the 919 IC Auto-
sampler plus is recognized by the computer software. To accomplish this,
3 Installation
￭￭￭￭￭￭￭￭
19