NOTE:
Press OK to continue.
Crypted
Press to highlight the country that you want to install, then press OK to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and off ers
information on broadcasted programmes. You can access it in digital mode by pressing EPG on the
remote control. Press EPG to bring up the EPG interface. Use to select a programme. Press EXIT to
stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN
Access extra in fo of programme
YELLOW
Open the remind er setting over view
BLUE
Set reminder of selected programme.
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press to select an item. Press and OK to select the
submenus. Press MENU to exit the item.
5.2 Picture menu
Picture Mode
Colour Tempera ture
Aspect Ratio
Noise Reduction
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press to select an option, then press to adjust.
Contrast
Brightness
Please check the settings for your cable system used by your provider!
Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Select the auto matic picture control mode. Available choices are Dynamic,
Standard, Mild and User.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User.
Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2.
Note: Some options may not be available under some sources.
Eliminates noise in the picture. Available choices are O , Low, Middle and High.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fi bre output of the entire picture, it will aff ect the dark
region of the picture.
9