Usb; Reminder When Using The Usb Player - Strong SRT 43UC4013 User Manual

Subtitle Language
Country
Restore Factory Default
Version Information
HDMI CEC
Home /Shop
USB Clone
5.7.1 HDMI CEC
CEC Control
Audio Receiver
Device Auto Power O
TV Auto Power On
Device List
Device Menu

6.0 USB

6.1 Reminder when using the USB player

Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.
STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is
consumer's responsibility.
For large fi le sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode
otherwise the USB storage device or the fi les stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) fi le
system provided with the Windows operating system. In case of a storage device formatted as a diff erent
utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not
exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB
Hard Disk and restart the TV system.
An "Unsupported File" message will be displayed if the fi le format is unsupported or the fi le is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
Press    to select your chosen Subtitle Language, then press OK
This item shows the region you been selected by fi rst time you install the TV.
Press  to select this function, by pressing OK and enter the PIN code. You
will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation
Your current software version is displayed.
See chapter 5.7.1.
Switch between Home modes and Shop modes with default more brightness
and Auto standby to off .
This option allows you to copy you channel list to USB device as back up.
Insert USB device and select Back up. To load this later back into TV, select
"Restore".
Press   to turn the HDMI CEC On or O .
Press   to turn the Audio Receiver On or O .
Press   to turn on this feature. When fi nished turn off your TV. The
connected device will turn off automatically.
Press   to select this option. When fi nished, turn on the connected device.
The TV will switch on automatically.
Press OK to open the main menu of device.
Access the device menu.
See chapter 3.
13