Important Notice
•
All the safety and instructions for operation and use of the equipment should be read carefully
before the system is operated.
•
Please keep this user manual for future reference.
•
Please follow all the operation instructions.
•
Cleaning: Make sure to turn off the power supply before cleaning. Use a dry soft cloth to clean
the equipment.
•
Don't leave the product in a place with high humidity and temperature.
•
Do not use any accessory, which is not recommended by the manufacturer .
•
Do not place the equipment on an unstable stand; Please use appropriate package or original
package by the manufacturer before transport to avoid damage caused by strong shake during
transporting.
•
Adequate ventilation is good for the maintenance of the equipment.
•
Power supply AC 100-240V.
•
Grounding: 3-wire grounding plug.
•
Hot swapping is prohibited.
•
Total 11 sets of IT-12D can be connected in one system. The cumulative cable
length should not exceed 70 meters. For particular requirement, please contact
the nearest JTS Service Centre for information.
•
For service, please contact the nearest JTS Service Centre. Do not take the equipment apart by
unauthorized personnel.
•
All JTS products are guaranteed for 1 year except for the cases as follows caused by personal
reasons:
A : Damage or malfunction caused by personal factors such as dropping, striking and so on.
B : Damage or malfunction caused by improper handling of the operator.
C : Parts loss or damage by taking apart by a unauthorized personal.
•
Only use JTS tailor-made cables to connect the system.
•
Turn off the power supply and unplug the equipment from the power supply in case the
equipment is not in use for a long time.
•
Upon receipt of the product, please fill out the Warranty Card enclosed and post it to JTS
Service Centre nearby in your region.