Beurer DM 49 Instructions For Use Manual page 13

Risk indicator:
The measurements can be classified and evaluated in accordance with
the following table. However, these standard values serve only as a
general guideline, as the individual blood pressure varies in different
people and different age groups etc. It is important to consult your doctor
regularly for advice. Your doctor will tell you your individual values for
normal blood pressure as well as the value above which your blood
pressure is classified as dangerous. The bar chart on the display and the
scale on the device show which category the recorded blood pressure
values fall into. If the values of systole and diastole fall into two different
categories (e.g. systole in the high normal category and diastole in the
normal category), the graphical classification on the device always shows
the higher category; for the example given this would be high normal.
Blood pressure value Systole
category (in mmHg)
Level 3: severe
red ≥ 180
hypertension
Level 2: moder-
orange 160 – 179
ate hypertension
Level 1: mild
yellow 140 – 159
hypertension
High normal green 130 – 139
Normal green 120 – 129
Optimal green < 120
Source: WHO, 1999 (World Health Organization)
Diastole
Action
(in mmHg)
Seek medical
≥ 110
attention
Seek medical
100 – 109
attention
Regular monitoring
90 – 99
by doctor
Regular monitoring
85 – 89
by doctor
80 – 84 Self-monitoring
< 80 Self-monitoring
7.6. Saving, displaying and deleting measured values
Whilst the message is being announced, the volume can be adjusted
with the function buttons
The results of every successful
measurement are stored together
with the date and time. If there are
more than 60 measurements, the
oldest measurements are lost.
• Switch on the device with the
START/STOP button
• Select the desired user memory
( ... ) by pressing the
function buttons .
13
.
Voice output when voice function
is active
The device is ready for use.
. You may start measuring.
User memory 1
User memory 2