8.7.4
Tool analog input
The tool analog input is a non-differential input, with voltage (0-10V). The electrical
specifications are shown below.
Parameter
Input voltage
Input resistance
Resolution
Two examples of how to use the analog input are illustrated in the following section.
Using the tool analog input, non-differential
This example shows an analog sensor connection with a non-differential output.
Using the tool analog input, differential
This example shows an analog sensor connection with a differential output. Work in the
same way as the non-differential sensor after connecting a negative output end to the GND (0V).
Min
Type
-0.5
-
-
Max
-
24
-
>100
10
Unit
V
MΩ
-
Bit
53