Table of Contents
Advertisement
Safety procedure:
1. Remove the mains input cable from the back of the control box to ensure that it is completely
powered off. Take necessary precautions to prevent other persons from re-energizing the system
during the repair period. When it is powered off, re-check the system to ensure the outage.
2. Please check the earth connection before re-starting the system.
3. Please comply with the electrostatic discharge (ESD) regulations when disassembling the
robot arm or the control box.
4. Avoid disassembling the power supply system of the control box. The high voltage can be
retained inside the power supply system for several hours when the control box is switched off.
5. Prevent water or dust from entering into the robot arm or the control box.
Cautions:
1. Replace the parts trapped in failure with new parts with the identical part number or the
corresponding parts approved by Suzhou Elite Robot Co., Ltd.
2. Reactivate all prohibited safety measures immediately upon completion of the work.
3. Record all maintenance operations in written form and save these records in the relevant
technical documents of the whole robot system.
4. The control box does not have a part that the end user can repair by himself. If you need
maintenance or repair services, please contact with your dealer or Suzhou Elite Robot Co., Ltd.
3.2 Disposal
The ELITE robot must be disposed in accordance with the applicable national laws and
regulations and the national standards.
3.3 Maintenance
The safety functions of the robot must be tested at least one time every year, as to ensure that
the functions are correct.
ELITE ROBOT
Advertisement
Table of Contents
