Remove System Components - Kaba ILCO Generation E-760 Series Installation Manual

3 • RE M O VE S YS T E M 70 0 CO MPO NENT S
1
1
2
Remove the battery cover (use a
to remove the retaining screw), and disconnect
the battery cable
4
Remove the self-aligning mechanism (remove 2
screws). Remove the four screws attaching the
support plate to the front housing, and remove the
support plate from the door.
2
/ " Allen key Remove the inside lever handle and washer. Use
1
16
a / " Allen key to loosen the Domware screw.
3
32
5
Remove the front housing from the door.
PK 29 15 -T 07 _20 14 E- 7 60 /77 0/7 90 SE R I ES R ET R OF I T I NS T ALL AT I ON GU I DE
P a ge 5
3
1
2
Remove the trim plate. Gently pull the top of the
trim plate away from the door with your fingers or
a small screwdriver, then disengage the bottom of
the trim plate from the support plate.
6
If participating in the North American buyback,
pack all removed System 700 components for
return shipment to Kaba Ilco.