Introduction And Disclaimers; Intr O Du C T I O N A N D Dis Cla I Me Rs - Kaba ILCO Generation E-760 Series Installation Manual

2 • INTR O DU C T I O N A N D DIS CLA I ME RS
Please read and follow all directions carefully.
!
Target Audience
These instructions are designed for use by maintenance professionals or lock installers who are
familiar with common safety practices and competent to perform the steps described. Kaba Ilco is
not responsible for damage or malfunction due to incorrect installation, however arising.
Retrofitting a Unican model 700 lock with a new E-760/770/790 lock is a simple process of:
1. Removing the 700 series inside trim components and outside housing
2. Drilling 3 new mounting holes in the door
3. Installing the replacement strike (if desired)
4. Installing the E-760/770/790 series outside housing and inside trim assembly
5. Testing the E-760/770/790 lock
6. Programming the E-760/770/790 lock
Technical Assistance
For technical assistance, call: 1 800 906.4526 / +1 514.340.9025
Warnings and Cautions
Important: The mortise must be functioning correctly in order to install the E-760/770/790 lock.
Before proceeding with these instructions, ensure the mortise is in good condition, or plan to install
a new mortise. Test the auxiliary (anti-pick) latch and the deadbolt. The mortise should function
smoothly and engage the strike with no excess friction.
!
Caution: Wear safety glasses when making the holes.
PK 29 15 -T 07 _20 14 E- 7 60 /77 0/7 90 SE R I ES R ET R OF I T I NS T ALL AT I ON GU I DE
P a ge 4