Hughes Strigo 4201 User Manual page 33

It is not recommended to downgrade the terminal software to an older
release. Doing so will automatically reset all configuration settings to factory
default and delete all user data stored on the terminal.
To upgrade the mobile terminal software follow these steps:
1. Store the Terminal Software Package on the local drive of a computer
attached to the terminal.
2. Select the "Browse" button.
3. Navigate to the storage location of the Software Package, select the file and
click "Open."
4. Click the "Start Update" button.
Note: The file selection can be cleared by clicking the "Clear" button.
The terminal will copy the Software Package from the computer to the terminal and
prepare the terminal for the SW upgrade.
After the Software Package is uploaded and verified the Web UI will present the
components which are ready to be installed.
Click the "Install" button to start the installation process. This will deactivate all
active connections and calls and place the terminal into service mode. After the
software installation is complete the terminal will automatically reboot.
Progress of the installation process is indicated to the user with a series of updates
on the Web UI.
After the reboot the software version can be verified on the Support page.
Chapter 4 • Using the Web UI
H61798 Revision E
33