Connecting The Terminal To The Computer - Hughes Strigo 4201 User Manual

Connecting the terminal to the computer

as best you can, click the Register with Network button to start the registration
process.
Once you are registered and attached, the terminal automatically establishes a data
connection.
You can connect your computer to the Hughes 4201 with one or more of the
following interfaces:
• WiFi
• Ethernet
During initial setup, the terminal can only be configured using an Ethernet
connection. Once the terminal has been configured, both interfaces (WiFi and
Ethernet) can be used for data transfer depending on the service required.
Chapter 2 • Using the Hughes 4201
H61798 Revision E
13