Table of Contents
Advertisement
Settings page
General setup
IP Address/DHCP Settings
The usage statistics are only an estimate and do not reflect actual billing
system details.
The Settings page provides a set of subpages for the configuration of various
parameters of the mobile terminal:
• General Setup
• IP Address/DHCP
• Ethernet Security
• Wi-Fi
• Security
• Outbound Filters
• Port Forwarding
This subpage allows the user to configure general parameters of the Hughes 4201. A
description of each item is as follows:
Mobile Satellite Terminal Startup:
• Auto Power On: When enabled, the terminal will automatically power on
when connected to the AC/DC adapter.
• Antenna Pointing: This parameter is used if the terminal is permanently
mounted and you want to bypass antenna pointing on subsequent power ups.
For permanent installations it is also recommended to enable "Auto Power On"
to avoid having to use the power button.
Access Point Name: Allows you to configure the APN if needed.
Language: Allows the user to select between English and French by clicking the
drop-down arrow, select the language and then click the Apply Changes button.
Mobile Satellite Terminal Local IP Address: This section allows the user to change
the local IP address of the terminal from the default 192.168.128.100 IP address. All
four octets are available to change. Once the local IP address is changed on this page
and applied, the first 3 octets of the DHCP address range will also change
automatically.
DHCP Server: Allows the DHCP server in the UT to be turned on or off by checking
the Enable box.
DHCP Address Range: This allows the user to set the range of DHCP addresses that
are given out by the UT to connected TEs.
Chapter 4 • Using the Web UI
H61798 Revision E
27
Advertisement
Table of Contents
