Table of Contents
Advertisement
Accessing the Web UI
Home page
Usage statistics
Chapter 4 • Using the Web UI
26
H61798 Revision E
The Hughes 4201 includes an internal Web User Interface (Web UI). To access the
Web UI, open your favourite web browser and type in the internal IP address of the
terminal, e.g., http://192.168.128.100. The Web UI opens up to the Home or
Terminal Status page.
Along the top of all Web UI pages are icons representing the categories of available
subpages; Home, Connections, Telephony, Settings and Support.
The Home page shows the current terminal status and allows you to set up your
initial data connection.
On the left side of the page is the STATUS bar. These items are updated
automatically when the status of any item changes.
1. Connection: This field indicates whether you are registered with the Strigo
network. It also shows the receive signal strength.
2. Position: This field displays the current position status. If the terminal
acquired a GPS fix, it will display the Latitude, Longitude, Fix Quality, and the
last time the GPS position was updated. Time displayed is UTC time.
3. Terminal Properties: This field indicates if Wi-Fi is on, whether security is
enabled or not, it shows the battery status and whether mains power is
connected.
Once connected to the network, the Terminal Status page will show that the UT is
registered with the network. In the middle of the Home page it will show that the
Data Connection is established along with the TE's local IP address and the global IP
address.
A list of all the connected devices on LAN and Wi-Fi is displayed.
Note: If the WebUI is accessed while the terminal is in antenna pointing mode or in
the process of establishing the satellite link, then this will be indicated on
the home screen as well.
While in pointing mode the terminal displays signal strength only in the
antenna pointing status window. The signal strength bar in the left status
window becomes active after exiting antenna pointing.
This page shows the statistics of transmitted and received data. The Trip statistics
can be reset, but the Lifetime statistics cannot be reset.
Using the Web UI
Chapter 4
Advertisement
Table of Contents
