How To Replace Ink Head Cleaner Felt - Nautilus Hyosung MX8800 Operator's Manual

Chapter4. Cash & Check In Module (CCIM)

How to replace Ink Head Cleaner Felt

▶ How to replace Ink Head Cleaner Felt
1. Open BM3 using BM3 Lock Lever and disassemble the felt unit step by step as
2. Rotate the felt adaptor as shows the picture (Replacing Ink Head Cleaner Felt), and
3. After replacing the new one by removing the tape, assemble the felt unit in the
4-28
shows the picture (Dissembling the Felt Unit).
At that time, Rotate two captive screws counterclockwise completely
remove the old one by using the pin set.
reverse process
© 2012 Nautilus Hyosung Inc. All Rights Reserved.
Dissembling the Felt Unit
Replacing Ink Head Cleaner Felt
Operator Manual