Remove Jam From Escrow - Nautilus Hyosung MX8800 Operator's Manual

Hide thumbs Also See for MX8800:
Table of Contents

Advertisement

Chapter4. Cash & Check In Module (CCIM)

Remove jam from Escrow

▶ Zone ⑫
4-20
1. If there is a jam on Escrow, remove a jammed Note or foreign substances from the
position where the arrow pointed in upper figure. If it is a heavy jam, call the service
engineer for clearing it.
2. If necessary, turn the green knobs (2 places, upper figure) clockwise or
counterclockwise and move the BM3 (Refer to figures below) to remove the jammed
Note more easily.
3. Be careful for the film inside the Escrow not to be missed or damaged during
removing the jammed Note or foreign substances.
4. After removing jam completely, release the lock lever 8 to open and push the
switch4. (upper figure).
5. And then come out one note from the escrow module. And remove the note as
shown in lower figure. If necessary, repeat it to end. Finally turn the Lock Lever8 to
"CLOSED" position.
Removing jam from Escrow
Removing note from Escrow
© 2012 Nautilus Hyosung Inc. All Rights Reserved.
Operator Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents