Avaya G450 Installing page 8

1 — 3
Replacing the G430 RAM card
About this task
Electrostatic alert:
Hold the module only by its edges to avoid damage from static electricity. Do not touch the top
or bottom of the circuit board. If possible, wear a wrist-strap and use an anti-static bag.
Procedure
1. Locate the RAM slot holding the RAM card, as shown in the figure.
2. Open the latches on both sides of the RAM slot. The RAM card lifts up.
3. Pull out the 256 RAM card.
4. Insert the 512 RAM card provided in the kit, or a replacement 256 RAM card, into the RAM
slot, and push in all the way. Do not use too much force.
5. Flatten the RAM card so it is flush with the main board.
The latches at both sides click shut.
January 2018
Three G430 left-side cover screws.
Installing the upgrade memory kit in the G450 and G430 Media Gateway 8