Avaya G450 Installing page 5

Important:
Remove the RAM card in SODIMM slot A.You can only replace the RAM card in
SODIMM slot A, you cannot add an extra card in SODIMM slot B.
4. Insert the 512 RAM card provided in the kit, or a replacement 256 RAM card, into the RAM
slot, and push in all the way. Do not use too much force.
5. Flatten the RAM card so it is flush with the main board.
Reinserting the G450 main board
Procedure
1. Verify that the latches on both sides of the main board are open.
2. Insert the main board into the slot.
3. Push the main board in until the latches begin to close.
4. Close the latches.
5. Close and tighten the two captive screws on the front panel.
January 2018 Installing the upgrade memory kit in the G450 and G430 Media Gateway 5