Avaya G450 Installing page 12

Warning:
If you remove a compact flash while it is in use, the announcement files on the compact
flash may become corrupted and the gateway may reset, causing all announcement files
in RAM to be lost.
2. Remove the compact flash memory card.
3. Insert the new compact flash memory card into the compact flash slot.
The announcement files of the old compact flash are written to the new compact flash.
Downgrading from a compact flash to internal flash memory
About this task
You can downgrade from using up to 1024 announcements on a compact flash to using up to 256
announcements on the internal flash.
Warning:
The internal flash can only store up to 256 announcement files, totaling no more than 45
minutes.
Procedure
1. Backup the announcements from the compact flash to a USB device by entering the
gateway CLI command backup config usb usb-device backup-name
announcements-compact-flash.
Note:
If you have only a few announcement files, you can use the gateway CLI command
copy announcement-file usb to copy them one by one.
2. At the SAT interface of the CM, enter disable announcement-board, and then set
enable CF to n in the change media-gateway screen.
3. Remove the compact flash memory card.
4. Optionally remove the second RAM card.
5. At the SAT interface of the CM, enter enable announcement-board.
6. Make sure there are no more than 256 announcement files in the backup.
If the number of announcement files exceeds 256, manually delete as many as necessary in
the backup directory.
7. Restore the announcements from the USB device to internal flash by entering the gateway
CLI command restore usb usb-device backup-name announcements-
internal-flash.
Note:
If you copied the announcement files one by one, you can restore them one by one
using the gateway CLI command copy ftp announcement-file.
January 2018 Installing the upgrade memory kit in the G450 and G430 Media Gateway 12