4.
Secure the bagger frame to the front mount
bracket using a carriage bolt (3/8 x 1 inch) and
nut (3/8 inch) as shown in
Figure 16
1. Nut (3/8 inch)
2. Carriage bolt (3/8 x 1 inch)
5.
Tighten the bagger frame and front mount
bracket nuts.
6.
Install the fuel tank; refer to the Operator's
Manual for the machine.
Note:
When you install the fuel tank bracket,
install the rear mount bracket between the
control tower and the fuel-tank bracket.
Figure 17
1. Bolt
2. Fuel tank bracket
7.
Raise the cushion.
Figure
16.
g037650
3. Front mount bracket
g037609
3. Rear mount bracket
6
Installing the Bags
Parts needed for this procedure:
2
Bag
Procedure
1.
Unlatch and open the hood assembly.
2.
Install the bags onto bag mounts
1. Bag mount
3.
Close and latch the hood assembly.
12
(Figure
Figure 18
2. Bag
18).
g037656