Setup - Toro E-Z Vac 78570 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
E-Z Vac Blower and Drive Kit (sold
separately)
Blower assembly (from the Blower and
Drive Kit)
Belt (from the Blower and Drive Kit)
Belt cover (from the Blower and Drive
Kit)
Knob (from the Blower and Drive Kit)
Front mount bracket
Lower mount bracket
Rear mount bracket
Right mount bracket
Flat washer
Bolt (3/8 x 4 inches)
Carriage bolt (3/8 x 1 inch)
Nut (3/8 inch)
Carriage bolt (1/4 x 5/8 inch)
Nut (1/4 inch)
Bagger-frame assembly
Clevis pin
Hairpin cotter
Thrust washer
Nut (3/8 inch)
Carriage bolt (3/8 x 1 inch)
Bag
Tube
Hose clamp
Blower clamp
Weight
U-bolt
Long U-bolt (for Multi ForceTM
machines with 52-inch decks only)
Locknut (1/2 inch)
Qty.
–
Prepare the machine.
Install the E-Z Vac Blower and Drive Kit
1
(sold separately).
1
1
Install the blower assembly, belt, and
belt cover.
1
1
1
1
1
1
2
Install the brackets.
2
1
1
2
2
1
2
3
Install the bagger frame.
1
1
1
2 Install the bags.
1
1 Install the bagger tube.
2
1
1
Install the weight.
1
2
6
Use