Installing The Bagger Frame - Toro E-Z Vac 78570 Operator's Manual

5

Installing the Bagger Frame

Parts needed for this procedure:
1 Bagger-frame assembly
2 Clevis pin
3 Hairpin cotter
1 Thrust washer
1 Nut (3/8 inch)
1 Carriage bolt (3/8 x 1 inch)
Procedure
1. With the assistance of another person, lift the
bagger frame and secure the bottom, rear side
of the frame to the lower mount bracket using a
clevis pin and hairpin cotter
Figure 13
1. Bagger frame
2. Clevis pin
(Figure 13).
g037647
3. Lower mount bracket
4. Hairpin cotter
2. Secure the frame to the pin on the rear mount
bracket using a thrust washer and hairpin cotter
(Figure 14).
1. Rear mount bracket
2. Hairpin cotter
3. Secure the bottom, front side of the bagger
frame to the transmission mount bracket using a
clevis pin and hairpin cotter
1. Clevis pin and hairpin
cotter (installed)
11
Figure 14
3. Pin (part of bracket)
4. Thrust washer
(Figure 15).
Figure 15
2. Transmission mount
bracket
g037648
g037649