Positioning The Flow Baffle; Using The Fill Indicator; Emptying The Grass Bags - Toro E-Z Vac 78570 Operator's Manual

Positioning the Flow Baffle

Adjust the baffle to position C (front position) for
bagging. Refer to the Operator Manual for the
machine.
Ensure that the baffle does not contact the blower
housing.
Figure 23

Using the Fill Indicator

The fill indicator on top of the bagger hood spins as
you fill the bags (Figure
the indicator stops spinning.
Clean the fill indicator impeller if there is grass or
debris buildup.
Figure 24
1. Fill indicator
24). The bags are full when

Emptying the Grass Bags

Grass bags are heavy when full. Be careful when
lifting or handling a grass bag that is full.
1. Disengage the PTO, move the motion-control
levers to the N
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Unlatch the bagger latch.
4. Open the bagger hood.
5. Compress the debris into the bags. With both
hands, lift up on the bag and unhook it from the
bagger bracket.
6. Grab the handle on the bottom of the bag and
tip it over to empty the bag
g012679
1. Bag
7. Repeat for the other bag.
8. Install the bag tab into the notch in the
bagger-support frame. Do this for both bags.
9. Lower the bagger hood over the bags.
10. Latch the bagger hood.
g037666
15
- position, and
EUTRAL LOCK
(Figure 25).
Figure 25
2. Bottom handle
g003357