Danfoss VLT MCA 117 Operating Manual page 50

Operating Guide | VLT® FCD 300 PROFIBUS Converter MCA 117
5.4.3 Conversion of Parameter 309 Terminal 53, Min. Scaling
Table 94: Parameter 309
FCD 300 series
Parameter 309 Terminal 53, Min. Scaling
Range 0–10.0 V
5.4.4 Conversion of Parameter 310 Terminal 53, Max Scaling
Table 95: Parameter 310
FCD 300 series
Parameter 310 Terminal 53, Max Scaling
Range 0–10.0 V
5.4.5 Conversion of Parameter 314 Terminal 60, Analog Input Current
Table 96: Parameter 314
FCD 300 series
Parameter 314 Terminal 60, Analog Input Current
Options [0] No Operation
[1] Reference
[2] Feedback Signal
[3] Torque Limit
[10] Wobble
1
The HW switch S202 for analog input 54 must be set to current (ON).
5.4.6 Conversion of Parameter 315 Terminal 60, Min. Scaling
Table 97: Parameter 315
FCD 300 series
Parameter 315 Terminal 60, Min. Scaling
50 | Danfoss A/S © 2019.11
FCD 302 series
6-10 Terminal 53 Low Voltage
-10.00 to parameter 6-11
FCD 302 series
6-11 Terminal 53 High Voltage
Parameter 6-10 to 10.00 V
FCD 302 series (1)
3-17 Reference Resource 3
7-00 Speed PID Feedback Source
1-93 Thermistor Resource
4-20 Torque Limit Factor Source
Parameter 3-17 Reference Resource 3 set to [0] No Function
Parameter 3-17 Reference Resource 3 set to [2] Analog Input 54
Parameter 7-00 Speed PID Source set to [7] Analog Input 54
Parameter 7-00 Speed PID Feedback Source set to [7] Analog Input 54
Parameter 3-17 Reference Resource 3 set to [2] Analog Input 54
Parameter 4-20 Torque Limit Factor Source set to [6] Analog Input 54
Not supported
FCD 302 series
6-22 Terminal 54 Low Current
Parameter Mapping Lists
AQ289550754901en-000101 / 130R0890