Checking The Route Plan Exchange Log - JRC ECDIS Instruction Manual

19.1.7

Checking the Route Plan Exchange Log

Checking the Route Plan Exchange Log.
1
Click on the [Menu] button on the left Tool Bar.
The menu is displayed.
2
Click on the [Maintenance] -
The [Route Plan Exchange
Setting item
Event Specify reception or transmission.
Time(UTC) Displays the time of reception or
or Time(LMT) transmission.
SFI When receiving: SFI of the transmission
source device
When transmitting: SFI of destination
device
Message Displays the transmission / reception
contents.
Detail View Detailed display of error content etc.
Section 19 Maintenance & Inspection
[Route Plan Exchange
Log] dialog box appears.
Setting contents
19-18
Log] button on the menu.
Setting value
Recv/Send/Timeout/Check
Query/Route Data/Route Plan/
Monitored Route/Alternate Route/
Response(Error)/Response(Accepted)/
Response(Reject)/Response(Pending)/
No Response(Query)/
No Response(Route)/No Data/
No Report/Correct/Incorrect