Assembly; Install Support Rod - Heidolph Hei-TORQUE Operating Instructions Manual

Assembly

Install support rod


On the back side of the unit you will find a slot to install the support rod.
To install the support rod you require a TORX screw driver T20.
The back support rod allows you to attach
the stirrer to a stand in conjunction with a
2-way clamp or to a wall grid.
➜ Install the support rod in the slot on
the back side of the unit.
➜ Ensure that the threaded hole in the
support rod aligns with the drill hole in
the housing.
➜ Secure the support rod with the
threaded screw supplied.
Assembly
Threaded screw
Threaded hole
Support rod
Slot on the back
side of the unit
Drill hole housing
Threaded hole
Secure with
threaded screw
19