After Using The Blender - Wilfa Gourmet Instruction Manual

6 6 P. 6 P.
Note: Always clean
the removable parts
immediately after use.
Note: It is
recommended that
meat and other foods
are cut into smaller
pieces before putting
them in the jar. Do not
operate the unit with
large quantities of food
at any one time.
To switch on the appliance, turn the control knob (5) to the
"ON/Program" position. The Indicator ring (4) will be illuminated.
To use a program function, turn the control knob to the "ON/Program"
position. The lights on the three buttons (1, 2, 3) will start to blink.
Press the program button for the desired program. The light on the
selected button will be illuminated. When the program is fi nished, the
unit will return to standby mode.
To control the rotary speed, turn the control knob between the
"MIN" and "MAX" positions. To instantly achieve the maximum
speed, press and hold the PULSE button (1) at any time when the
control knob is positioned between the MIN and MAX settings.
Crush ice button
Press this button to crush ice. The appliance starts crushing according to the
pre-set speed profi le. The unit will stop automatically at the end of the pro-
gram. Pressing the button again during operation will terminate the program
and return the unit to standby mode.
Smoothie button
Press this button to make delicious smoothies. The appliance starts mixing
according to the pre-set speed profi le. The unit will stop automatically at the
end of the program. Pressing the button again during operation will termi-
nate the program and return the unit to standby mode.
Pulse button
Press this button to run the pulse mode. The unit only operates when the
pulse button is pressed.

After using the blender

1
Disconnect the power from the mains supply.
2
Remove the lid (together with the measuring cup) from the jar.
3 Remove the jar from the main unit.