powersoft IpalMod Service Manual page 19

GAP_PAD 3000S30
Stick the GAP_PAD VO Ultra soft on top of each thermal regulator (Fig. 33)
Peel the gap pads 3000S30 and properly apply them as shown in (Fig 34)
Carefully clean the chassis: remove any residue of glue, dirt and dust. (Fig. 35)
GAP_PAD VO Ultra soft
(Fig. 33)
(Fig. 34)
(Fig. 35)
GAP_PAD HI-FLOW 300P 40x53 GAP_PAD HI-FLOW 300P 37x33
IPALMOD | SERVICE MANUAL
19