JUMO mTRON T System Description page 71

8.2 System expansion (system version 02)
The expansion of the setup program and the system software allows the measuring, control,
and automation system to offer new features which are intended to be used in such areas as
process engineering:
• Program generator with process steps
• Expanded user administration
• Expanded process screen editor
Program generator with process steps
• The nine program generators support the use of up to 100 process steps.
• In every process step, the permissible setpoint values and control contacts are selected and
the time limits of a program section are defined. This specification is normally done by the
plant manufacturer because specific knowledge of the plant is necessary for this job.
• While entering a program in the program editor, a specific process step is assigned to each
program section. This means that the conditions which are defined in the process step are
valid for the particular program section. As a result, only the permissible setpoint values and
control contacts are used in the program section. Furthermore, the section time lies within
the predefined limits.
Expanded user administration
• Up to 16 user groups are supported by the system. Specific user rights that deal with the
displaying and editing of certain system values or the controlling of certain system functions
are assigned to each user group.
• Up to 50 users can be managed in the system. Each user gets the rights of the user group.
• The user group rights are exclusively defined with the setup program. The users them-
selves can be administrated with the setup program or the multifunction panel. The option
to restrict the user administration to the multifunction panel is available.
Expanded process screen editor
• In each of a maximum of 18 process screens up to 16 levels can now be defined. The single
objects of a process screen are assigned to a level.
• Visibility and editability of a level can be influenced by the user group or by the PLC.
• Additional object types allow the selection of programs and process steps, are used to dis-
play batch texts, or provide the user logon/logoff in the process screen.
• By hiding the JUMO toolbar, the whole screen area is available for the customer-specific
process screen.
8 Appendix
71