5.3.1
Base units
Installation of a base unit, using the example of a central processing unit 705001
Installing the end brackets
(B)
(B3)
(B4)
Procedure:
Step
1
2
3
Activity
Mount the central processing unit (A) on the DIN rail from below and press upward (A1).
Pivot the central processing unit (A) toward the rear until it snaps into place (A2).
Position the end bracket (B) on the DIN rail and move to the right against the central pro-
cessing unit (B3). Fasten the end bracket using a screwdriver (B4).
(A)
(A2)
(A1)
5 Installation
35