Table of Contents
Advertisement
Unit Installation Site Selection and Attentions
Select Unit installation site
Select Indoor unit installation site
•
•
•
•
•
•
•
Following locations may cause the air conditioning unit fault. If you have to select this kind of
environment, please contact Trane service centre for help.
Electrical wiring layout
•
•
•
•
•
•
8
Unit installation must comply with the local and national safe codes.
Unit installation quality affects air conditioning operation directly. User can not install the
unit by himself. Please contact your dealer and invite professionals to carry out installation
and commissioning of the unit in accordance with this manual.
Connect the power supply after all installation processes are completed.
Avoid direct sunlight.
Ensure that the top suspension rod, ceiling and building structure etc. are strong enough to
support the unit.
Drainage pipe is easy to connect from outside.
Inlet and outlet air fl ow are smooth.
Indoor and outdoor connecting pipe are easy to extend to the outdoor.
There are not infl ammable and explosive articles or gas in the surroundings.
The damp environment with corrosive gas, heavy dust, salt mist and oil smoke can not be
the installation site.
Attention
Full of engine oil;
High frequency facility (radio equipment, electric welder and medical equipment);
Special environment.
Installation must comply with national wiring regulations.
Please select rated voltage and special air conditioning circuit.
Do not pull the power wires.
Please invite professionals to install in accordance with local laws and regulations and this
manual.
Diameter of power cord should be enough. Only specified flexible cord can replace
damaged power cord and wires.
Please invite professionals to install. Connect wires to special building earthing device
reliably. There should be adequate leakage protection and air switches for fixed wires.
The air switch with magnetic and thermal trip function is for short circuit and overload
protection.
Seaside saline area;
Sulphuric gas (sulphuric hot spring);
AMS-SVX02A-EN
Advertisement
Table of Contents
