Table of Contents
Advertisement
Unit Installation
Installation Diagram
Figure 2.
Verify indoor unit installation site
1.
2.
3.
4.
5.
6.
7.
There are pretty much oil smoke and powder in places such as the dining hall and kitchen.
Centrifugal fan, heat exchanger and water pump in places above are easily polluted and affect
heat exchange ability, water dropping and water pump function. In that case, please take
following measures:
1.
2.
10
Over 1,500mm
Ensure no barriers in indoor unit air inlet and outlet for good ventilation.
Ensure installation complying with the diagram.
Select a low running noise and less vibration location which can support 4 times of indoor
unit weight
Ensure horizontal installation location.
Select a location, which is easy to discharge condensate water and connect to outdoor unit.
Ensure enough space for repair and maintenance.
ground is 1,800mm at least.
Check hoist screw installation site if support 4 times of the unit weight. Strengthening it
before installation if necessary (see installation paperboard for points to fi x).
Attention
Ensure the range hood has good function, avoiding oil smoke entering the air conditioning.
Keep air conditioning away from the kitchen.
Over 20mm
Air outlet
Air outlet
Ground
Air outlet
Over 1,500mm
The distance between indoor unit and
AMS-SVX02A-EN
Advertisement
Table of Contents
