Introduction; Means Of Representation For This Operator's Manual; Wacker Neuson Representative; Described Machine Types - Wacker Neuson IEC Operator's Manual

3 Introduction

3 Introduction
3.1

Means of representation for this operator's manual

Warning symbols
This operator's manual contains safety information of the categories:
DANGER, WARNING, CAUTION, NOTICE.
They should be followed to prevent danger to life and limb of the operator or damage to equipment and
exclude improper service.
DANGER
This warning notice indicates immediate hazards that result in serious injury or even death.

WARNING
This warning notice indicates possible hazards that can result in serious injury or even death.

CAUTION
This warning notice indicates possible hazards that can result in minor injury.

NOTICE
This warning notice indicates possible hazards that can result in material damage.

NOTES
Complementary information will be displayed here.
Instructions

1. Numbered instructions indicate that you have to carry out something in a defined se-

3.2

Wacker Neuson representative

Depending on your country, your Wacker Neuson representative is your Wacker Neuson service, your
Wacker Neuson affiliate or your Wacker Neuson dealer.
You can find the addresses in the Internet at www.wackerneuson.com.
The address of the manufacturer is located at the beginning of this operator's manual.
3.3

Described machine types

This operator's manual is valid for different machine types from a product range. Therefore some figures
can differ from the actual appearance of your machine. It is also possible that the descriptions include
components which are not a part of your machine.
Details for the described machine types can be found in the chapter Technical data.
6
Danger can be avoided by the following the actions mentioned.
Danger can be avoided by the following the actions mentioned.
Danger can be avoided by the following the actions mentioned.
Danger can be avoided by the following the actions mentioned.
This symbol indicates there is something for you to do.
quence.
This symbol is used for lists.
100_0000_0003.fm