Emptying The Waste Collectors; Cleaning - UNITED OFFICE UAVS 300 A1 Operating Instructions And Safety Instructions

Emptying the waste collectors

WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on .
NOTE
► Empty the waste collectors
material from being drawn into the cutting blades from below .
► Dispose of the waste material in an environmentally-responsible manner .
♦ Pull the large waste collector
♦ Take the small waste collector
♦ Empty the large waste collector
♦ Place the small waste collector
(see fig . 3) .
♦ Slide the large waste collector
until you hear it click into place (see fig . 4) .

Cleaning

DANGER! RISK OF ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance . There is a risk of
electric shock!
WARNING! RISK OF INJURY!
► The appliance becomes hot during use . Allow the appliance to cool down
completely before cleaning it .
► Do not touch the cutting blades of the appliance with your fingers .
The cutting blades are very sharp!
CAUTION! PROPERTY DAMAGE!
Do not spray any oil or other lubricants into the cutter openings
These can irreparably damage the appliance .
► To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning .
► Do not use caustic, abrasive or solvent-based cleaning materials . These can
damage the surfaces of the appliance .
UAVS 300 A1
w e
/ regularly to prevent the shredded
e
out of the appliance base
w out of the large waste collector
e and small waste collector
w back in the large waste collector
e fully into the appliance base
t
.
e .
w separately .
e
t again
2 / 9 .
│ ■
GB │ IE 27