Operation; Switching The Appliance On; Inserting Paper - UNITED OFFICE UAVS 300 A1 Operating Instructions And Safety Instructions

Operation

Switching the appliance on

♦ Move the REV/OFF/AUTO/FWD switch
shredding . The power lamp
appliance is now ready for use .
NOTE
► Make sure the large waste collector
ance base
start! The power lamp
is pushed all the way into the appliance base

Inserting paper

CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening
clips or staples larger than 25 mm attached! These could damage
the cutting blades .
NOTE
You can shred up to 10 sheets (80 g/m
max.
10
x 80g/m
Fig . 7
NOTE
► Regularly remove any residue left in the cutting blades with a suitable
object (e .g . brush or tweezers) . Ensure that the appliance is unplugged
before doing this .
■ 24 │
GB │ IE
6 lights up permanently blue and the
t and has clicked into place! Otherwise the appliance will not
6 only lights up once the large waste collector
Insert paper into the middle of the cutter opening for
paper 9 from above and in portrait format (see fig . 7) .
The appliance starts automatically and switches itself off
automatically if no further paper is inserted .
8
to the AUTO position for
e is inserted correctly into the appli-
t .
9
if it still has paper
paper) at the same time .
2
UAVS 300 A1
e