Assembly - UNITED OFFICE UAVS 300 A1 Operating Instructions And Safety Instructions

Assembly

WARNING! – RISK OF INJURY!
► Do not connect the appliance to a power socket during assembly .
► The cutting blades in the cutter attachment
sharp . Take extreme care when assembling the appliance .
♦ Place the appliance base
♦ Fit the plain castors
on the rear of the base
base
Fig . 1
♦ Place the appliance base
♦ Hold the cutter attachment
and position it over the appliance base
backwards and the opening in the appliance base
♦ Press the cutter attachment
place on the appliance base
♦ Place the small waste collector
Fig . 3
♦ Slide the large waste collector
■ 22 │
GB │ IE
t
0 on the front and the castors with locking levers
t
. Press the castors into the holes on the appliance
t until you hear them click into place (see fig . 1) .
t
3
3
3
of the appliance are very
flat on the floor with the rear side downwards .
Fig . 2
on the castors after fitting them .
by the two integrated carrying recesses
t so that the power cable
t
firmly downwards until you hear it lock into
t (see fig . 2) .
w in the large waste collector
Fig . 4
e fully into the appliance base
q
5
1 points
points forwards .
e (see fig . 3) .
t (see fig . 4) .
UAVS 300 A1