How To Set Freewheel Mode - CareCo Minimus MS01097 User Manual

6. OPERATION
How To Set Freewheel Mode (Only the assistant can operate)
Whenever you need or want to push your Scooter for short distances, you can put it
in freewheel mode.
1. Locate the manual freewheel lever at the top right of the rear section.
2. Push forward on the manual freewheel lever to disable the drive system and the
brake system. You may now push your Scooter.
3. Push the manual freewheel lever rearward to re-engage the drive and the brake
systems; this takes your Scooter out of freewheel mode.
4. Ensure free wheel lever is engaged in the 'DRIVE' position.
5. Ensure free wheel lever is disengaged in the 'NEUTRAL' position.
6. Parking brake is in free wheel mode (Neutral position).
WARNING! When your Scooter is in freewheel mode, the braking system
is disengaged.
Disengage the drive motors only on a level surface.
•
Ensure the key is removed from the key switch.
•
Stand to the side of the scooter to engage or disengage freewheel
•
mode. Never sit on a scooter to do this.
After you have finished pushing your Scooter, always return it to the
•
drive mode to lock the brakes
WARNING! Before placing your Scooter into or taking it out of freewheel
mode, remove the key from the key switch. Never sit on a Scooter when
it is in freewheel mode. Never put a Scooter in freewheel mode on any
incline.
NEUTRAL
DRIVE
23