Measuring Your Weight - A&D UC-352BLE Instruction Manual

Measuring Your Weight

1. Confirm that the scale is turned off, and step on the
scale gently.
Measurement starts when you step on the scale.
A progress bar is displayed during measurement.
Stand up straight and remain as still as possible
during measurement.
2. Step off the scale when "5tep" and "off" are alternately
displayed with three beeps.
All display segments are indicated when you step
off the scale.
Do not touch the scale while all display segments
are indicated. It may cause misreading.
If you do not step off, the scale beeps every two
seconds.
The scale turns off automatically after two
minutes.
3. Confirm the measurement results.
Data is automatically sent to the receiver if the
receiver is in the receivable state.
If the scale is not paired with a receiver, the data is
stored in the scale memory. (See "Transmitting
temporarily stored data".)
Data stored in the scale memory cannot be
viewed on the scale. To view data stored in
memory, transfer them to your mobile device and
display in the A&D Connect app.
The scale turns off automatically 60 seconds after
the measurement results are displayed.
If you press down the scale with your foot while
the measurement results are displayed, the scale
turns off.
You can also turn the scale off by pressing the Set
switch.
English 9
Beep
Beep beep beep