Installing (Or Replacing) The Batteries - A&D UC-352BLE Instruction Manual

Installing (or Replacing) Batteries
1. Open the battery compartment cover on the
underside of the scale.
2. Install four new AAA size alkaline batteries
with the positive (+) and negative (-) terminals
properly aligned
symbols in the battery compartment.
3. Close the battery compartment cover.
Install each battery with the positive (+) and negative (-) terminals properly aligned
with the corresponding symbols in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when the
Do not mix new and used batteries. It may cause damage to the scale or shorten the
battery life.
Be sure to use AAA size alkaline batteries. Do not use any other type of battery.
Never use rechargeable batteries with this scale.
The battery life is dependant upon the environmental temperature, battery type and
usage.
The supplied batteries are for checking operation of the scale and may have a short
lifespan.
Remove the batteries from the battery compartment, when the scale is not to be used
for a long time. Storing the scale with the batteries installed may result in battery fluid
leaking from the batteries, causing damage to the scale.
The scale has an
displayed for 60 seconds, the scale is automatically turned off.
with the
Automatic Power-off Function
Automatic power-off"
"
corresponding
function. After the measurement results are
English 6
symbol is displayed.