Hardware Management - H3C SR8800 Series Installation Manual

Hardware management

This chapter describes the hardware management functions that the router provides. With these functions,
you can conveniently view the operating status of your router, and manage and routinely maintain the
hardware modules of your router.
NOTE:
The output depends on your router model.
Displaying the electrical label data for your router
Electrical label data is also called permanent configuration data or archive information, which is written
to the storage component of a card during device debugging or testing. The information includes name
of the card, card serial number, and vendor name.
Use the display device manuinfo command to display the electronic label data for your router, including
the card name, serial number, MAC address, manufacturing date, and vendor name.
# Display the electrical label data for the card in slot 3 on your router.
<Sysname> display device manuinfo slot 3
Slot 3:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210231A0E50103000002
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Slot 3 Subslot 1:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210231A85JH105000015
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Displaying the card information
Use the display device command to display card information for your router, including the slot number,
card type, card status, and software version.
# Display the summary information of all cards on your router.
<Sysname> display device
Slot No.
0
1
2
3
: SPC-1010-II
: 000f-e200-5600
: 2011-02-28
: H3C
: PIC-TCP8L
: NONE
: 2010-05-24
: H3C
Brd Type Brd Status
SR02SRP1E3 Master
NONE Absent
NONE Absent
SPE-1010-II Normal
Software Version
SR8800-CMW520-R3331
NONE
NONE
SR8800-CMW520-R3331
54