Advertisement
Table of Contents
Hand Crimp Tool for ULTRA-FIT Crimp Terminals
Modular Crimp Head
Order No. 63827-5470
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomically designed soft handles
Precisely designed crimping profiles with simple contact positioning
Easy handling due to outstanding force ratio
Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products:
ULTRA-FIT Crimp
Terminal
Terminal Order No.
Series No.
172253-3111 172253-3112
172253
172253-3123
DEFINITION OF TERMS
BELL MOUTH
CONDUCTOR
CUT-OFF
CRIMP HEIGHT
TAB
Doc No: ATS-6382754HM
Revision: A
Application Tooling
Specification Sheet
Terminals, 20-22 AWG (UL1061) wires.
Wire Size
AWG mm²
20-22
---
STRIP LENGTH
BRUSH
WIRE
Release Date: 01-30-15
Revision Date: 01-30-15
Insulation Diameter
UL1061 Wire is Recommended
Type
mm
UL1061
1.22-1.44
SEAM
INSULATION
CRIMP HEIGHT
UNCONTROLLED COPY
TYPE 4A
Hand Crimp Tool
Order No. 63827-5400
Strip Length
In.
mm
.048-.057
3.50-4.00 .138-.158
BEND UP
TWISTING
BEND DOWN
In.
ROLLING
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for molex 63827-5470
Summary of Contents for molex 63827-5470
- Page 1 Hand Crimp Tool for ULTRA-FIT Crimp Terminals Application Tooling TYPE 4A Specification Sheet Modular Crimp Head Hand Crimp Tool Order No. 63827-5470 Order No. 63827-5400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles ...
- Page 2 3. This tool is intended for standard conductor sizes. It may not give a good insulation crimp support for all insulation sizes. 4. Molex does not repair hand tools (see warranty). The replacement parts listed are the only parts available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased.
- Page 3 Hand Crimp Tool for ULTRA-FIT Crimp Terminals 1. With the hand tool in the open position, pivot the terminal locator open by pulling up on the locator knob SWING LOCATOR and lift the wire stop blade up. See Figure 1. OPEN HAND TOOL 2.
- Page 4 2. Insulated rubber handles are not protection against electrical shock. 3. Wear eye protection at all times. 4. Use only the Molex terminals specified for crimping with this tool. CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling. UNCONTROLLED COPY Doc No: ATS-6382754HM...
- Page 5 Order No. Description 63816-0000 Hand Crimp Frame (Short) 63816-0050 Hand Crimp Frame (Long) 63827-5470 63816-0200 Battery Power Tool (110 V) 63816-0600 Battery Power Crimp Adapter 63816-0250 Battery Power Tool (220 V) 63816-0600 Battery Power Crimp Adapter 63816-0100 Air Power Tool...
- Page 6 Crimping Spring HANDLE SPRING M4 X 6mm LONG BHCS RATCHET RELEASE LEVER CRIMPING SPRING (2) Figure 9 Visit our Web site at http://www.molex.com UNCONTROLLED COPY Doc No: ATS-6382754HM Release Date: 01-30-15 Page 6 of 6 Revision: A Revision Date: 01-30-15...
Need help?
Do you have a question about the 63827-5470 and is the answer not in the manual?
Questions and answers