22 Connection of the appliance to a PC
The appliance has an ETHERNET interface that makes it possible to connect directly to a PC.
For this type of connection, no driver is necessary.
Connect your appliance to your PC by using a crossed ETHERNET cable (available in option with the num-
ber 298504246 asking SEFRAM).
Configuration of the connection:
-
Ethernet connection of your appliance to the PC.
To change the IP address of your appliance, press
The PC software in communication with the appliance must have the same IP address as the appliance,
just like in the example below:
PC software, settle the
7849B – 7859B – 7817B
PC
address at
192.168.0.170
Ethernet
network
p.
92
and:
With the virtual digital
keypad, type the IP
address you want, then
validate with ENTER
784X