Table of Contents
Advertisement
The 4 frequencies or transponders of the satellite you are trying to point are editable :
Attention:
To identify a satellite, you must be locked on all 4 transponders. (Quality > 0)
However, some transponders are regularly modified. See the frequency range of the sat-
ellite when a transponder does not seem to work.
Some switches or LNB work only with DiSEqC commands.
In this case, position the band (OL) and the polarization on DiSEqC at the Configuration
page LNB-DiSEqC.
(Attention: the Check Sat is slower when using the DISEqC command).
You can save a new satellite to find it among the possible 10 :
7849B – 7859B – 7817B
p.
21
Advertisement
Table of Contents
