Transmitter Update; Instruction For Use - SEFRAM 7849B User Manual

9.2

Transmitter update

You can update the frequencies/names of transmitters :
manually on your device
or
by importing the configuration from the TER file. Csv
All you have to do is to copy this file on a USB stick and go to « Configuration » then « Import »
9.3

Instruction for use

1/ Connect the antenna to the device and turn it on.
2/ on the Home page, switch to pointing mode.
Choose which transmitter to point to in the list (example STETIENNE)
3/ Slowly steer the antenna to the maximum level and hear the locking melody.
A melody is audible as soon as the first channel is found and then beeps are audible.
These beeps are getting closer and closer as the quality increases.
7849B – 7859B – 7817B
p.
43